Updated: Jun 16
The whole house water filtration systems seem to have taken everyone by storm, and for the right reasons. The increasing popularity of whole house water filters comes from their ability to draw out commonly found impurities from well water and provide high-quality water for consumption and daily use. We all know that a myriad of contaminants and excess minerals present in well water make it unsafe and hazardous to human health in its natural form. Therefore, you need to process it properly to eliminate these elements. This is where a water filtration system can come in handy.
So, if you are not sure if the water you use is clean and safe, investing in a whole house water filtration system is your best bet for a pocket-friendly and hassle-free solution. More and more people are choosing whole house water filters due to their affordability and convenience. What makes the process of finding the right kind of whole house water filtration system challenging is the availability of unlimited options in the market. If you’re struggling to buy the best whole house water filtration system for your home, fret not! We’ve got you covered. This article will serve as your guide to the best whole house water filtration systems for well water to opt from. So, let’s cut to the chase without any due!
#1 SpringWell's Whole House Water Filter System
1,000,000 gallons per year
Removes iron, hydrogen sulfide, and manganese
Up to 125 PSI water pressure
The first on our list of best whole house water filtration systems is SpringWell, particularly effective in treating well water to maintain its quality. The filter works by running the water through various phases to yield hygienic and safe water for everyday use and ingestion. Moreover, the filtration system also includes UV filters and a salt-free water softener that binds extra minerals and ensures a safer and healthier supply of water.
The filtration system is aimed at providing optimal results without requiring extensive care. The unique up-flow mechanism and the specialized double-tank body of this filtration system facilitate longer water processing in the water filtering resins. Besides, it inhibits the clogging of the filtration unit that might lead to reduced water flow.
After entering the filtration unit, the well water gets processed by going through different stages. The process initiates from the water passing through the sediment pre-filter and then moving to the salt-free descaler, mineral stone, activated carbon filter, sub-micron post-filter, and finally the UV filter. Different contaminants and toxins get removed at each step of the filtration process.
The 20-inch sediment pre-filter in this filtration system is twice as effective as a 10-inch pre-filter used in mainstream whole house filtration systems. This filter helps to prevent the buildup of rust, mud, and other residues. Similarly, the salt-free conditioner or descaler keeps the water free from mineral accumulation. Additionally, the copper-zinc and mineral stone aids in scaling down heavy metals as well as limits the growth of bacteria and fungus.
Chemical substances, pesticides, and herbicides are removed when the water goes through the activated carbon filter. The sub-micron filter wipes out the residual elements. Lastly, the UV filter is responsible for making sure there are no germs, bacteria, and viruses in the water.
The unit has a capacity of 1,000,000 gallons of water.
What makes this filtration system the best whole house filter is the fact that it doesn’t require back-flushing or draining and doesn’t add contaminants back to the water. The tanks of the filtration system are very durable and the filters are also easy to replace.
#2 Aquasana 1,000,000 Gallon Well Water Whole House Filter
up to 125 PSI water pressure
500,000 gallon per year
There is a reason this filtration system made to our selection of the best whole house water filtration cartridges. This system is also aimed at providing you with clean and safe well water. What makes it so special is its 6-stage filtration process that ensures the highest-grade drinking and usage water for you and your family. It’s also designed with a UV filter and a salt-free conditioner that give it incredible filtration power.
The filtration unit gives the maximum output and doesn’t need consistent upkeep and regular repairs. The dual-tank built and unique upflow allows the water to remain in the filtration resins for a lot longer, enhancing its contaminant removal effect. It also hinders the blockage of the filtration unit, so the water flow remains steady. The heavy-duty water tanks and easy-to-change filters make it an ideal choice for your house.
The six-stage filtration process involves the well water going from the sediment pre-filter to the salt-free scale reducer, copper-zinc, and mineral stone, activated carbon filter, sub-micron post-filter, and then to the UV purifier. All of these filtration steps serve to eliminate various harmful elements and contaminants, providing you healthy and fresh water every time.
The components of this pro-grade water filtration system comprise 20-inch pre and post filters, descaler tanks, filter tanks, bend supports, shut-off valves, and brass fitting for ¾-inch and 1-inch pipes.
The 20-inch pre-filter offers two times greater filtration results than ordinary filters and keeps the pipes free from all sorts of buildups and corrosion. The salt-free conditioner/descaler filter averts mineral blockage while the copper-zinc and mineral stone assists in removing heavy metals, scale, and chlorine in addition to averting microbial development. The high-performance activated carbon filter removes harmful compounds without stripping water completely of healthy minerals. The UV filter guarantees a germ-free supply of water.
The filtration system has a storage capacity of 500,000 gallons of water.
It is easy to maintain with no need for draining or back-flushing. You can effortlessly change the pre and post filters after a few months like a pro.
#3 Express Water Heavy Metal House Water Filter
Up to 5 microns filtration
0.25 gallons per second
The Express Water Filtration System involves a three-phase water-purifying process to clean your heavy, polluted, and metal-ridden well water. This is known to be one of the heaviest and fastest stainless steel whole house water filters for well water that provides a flow rate of 0.25 GPM. The unit is easy to maintain without spending a lot of time or money on it. The simple and easy-to-manage design allows stress-free and fast replacement of the filters. You can keep a check on the condition of the sediment filter through its transparent covering.
The course of the three-stage filtration process starts with well water entering the sediment filter which purifies the water of rust, dirt, and sediment. In the next stage, the water passes through a KDF filter, containing ionically charged copper and zinc in addition to catalytic carbon. At this stage, heavy metal compounds are removed from the water. The third and last stage consists of using the activated carbon filter that eliminates a number of toxic chemicals (like pesticides and herbicides) and reduces smell, turbidity, and odor in the water.
The average capacity of the system is 100,000 gallons of water, which is ample for approximately 6 to 12 months of use.
The pressure release buttons of this stainless steel whole house water filter make it convenient to change the filters without any difficulty. The only drawback of using this filter is that the water flow slows down greatly as the water enters the KDF filter at the second stage.
#4 iSpring WGB32B-PB-3-Stage Whole House Water Filter System
Coconut shell carbon filter
15 gallons per minute flow rate
Meets ANSI/NSF standards
Yet another three-stage water filtration unit that treats contaminated well water and provides you with great-tasting and safe water for use. The metal and excess mineral removal with this filtration cartridge doesn’t just improve the taste of water but also ensures your wellbeing and prolongs the life of your home appliances. Make sure to set up the unit at the entry point of well water to your house to get a clean water supply throughout the house.
The first stage of water filtration includes the water running through a polypropylene sediment tank that draws out large particles, such as dirt, rust, sand, and sediment from the water. The next stage uses a CTO carbon block filter made with top-quality coconut shell carbon for optimum filtration and longer life of the filter. It gets rid of various chemical agents that affect the taste and smell of water, like chlorine, pesticides, and VOCs. These two filters are designed according to the NSF/ANSI guidelines to deliver you the top-notch filtration process. The third stage involves the carbon filter removing heavy metals, particularly lead and iron, to provide safe water for drinking and other home use. These filters don’t rob the water of healthy minerals so you get the health benefits of essential minerals as well.
This whole house water filtration system has a storage capacity of 100,000 gallons of water and is the best choice for you if you are a family of four.
The maintenance of this filtration system is not the time or money-consuming and doesn’t require any professional skills either. However, some users found the installation process hard.
#5 Pelican Iron & Manganese Water Filter
Best in class against iron and manganese
600,000 to 1,000,000 gallons per year
This water filtration system is best for you if you notice orange or red stains on your toilet, sink, laundry, crockery, or appliances due to the well water you use at home. These spots are an indication of high amounts of iron and manganese in the water and need a solution. Luckily, Pelican has the answers to your woes. The advanced technology used in the production of this water filter specifically targets and reduces the concentration of iron and manganese in the water. It eliminates iron up to 10 PPM from the well water, making it the best whole house water filtration system for removing iron and manganese. Whereas commonly found iron and manganese removal filter in the market remove around 7 to 8 PPM iron from the well water. The Pelican water filter removes odor and enhances the taste of water.
The non-electric system of this filter for treating well water comprises four stages of filtration. The first sediment filtration stage removes particles of dirt, sand, rust, and debris, etc. using a 5-micron filter. Other than harming your appliances and health, these impurities can affect your plumbing connections and decrease the water flow. In the second stage of filtration, water moves through a chlorinator installed in your water supply line. The chlorination mechanism of this filter doesn’t run on electric power like most others available in the market. It runs on water pressure instead that helps to pull the required volume of chlorine. The concentration of chlorine acquired depends on the volume of water entering the tank, not the pressure of water. The third stage is where iron is eliminated from the water using a high-duty greensand-plus filter. All the iron is drawn out of the well water through the backwashing system of the filter. The final stage of carbon filtration facilitates the complete removal of chlorine added to the water for disinfecting it. Other toxic substances, such as VOCs and chloramines are also removed during this phase.
The filter comes with two flow rate options; 10 GPM and 15 GPM. The capacity of the Pelican water filtration system is between 600,000 to 1,000,000 gallons, enough for approximately 5 years.
The installation process is easy to follow and anyone can install the system using the installation guide provided with the product or available on the brand’s website.
The only downside of getting this filtration system is that the chlorine injecting process makes annoying click noises.
Whole House Water Filter for Well Water Buying Guide
If you’re not familiar with what well water is, let’s help you understand. Well water comes from the ground, hence, also called groundwater. People have long been using wells to get water from the ground on their land. There are many water supply companies and towns that are now getting their water from deep wells, bored into local aquifers. Water obtained from deep wells usually doesn’t require as much treatment as surface water. Well water is basically stored in a threshold under the ground. A structure, known as well, is built to tap into it and supply groundwater to homes or other buildings for use. The process works by drilling a hole into the ground and using a pump to deliver fresh water from the well. Unfortunately, the water obtained from the ground is filled with various types of pollutants and minerals, known to be unsafe and detrimental for personal and household use. The most common contaminants found in well water are chlorine, magnesium, chlorides, and a number of other impurities. These toxins are not only harmful when in high concentrations but also make the water smell and taste bad. There are two effective ways of filtering well water, biological and physical.
Why you need well water?
In many regions around the world, especially rural areas, groundwater is a necessity. Besides, it’s a cheap and never-ending source of obtaining fresh water. Although, it’s highly crucial that you don’t compromise on the quality of the water supplied to your home and only use clean and toxin-free water for drinking and other purposes. Since well water comes from under the ground and contains innumerable contaminants that can be hazardous in a number of ways. The bad odor of well water alone is a result of bacterial development in the water. This is the reason you need a whole house water filtration system to get rid of all kinds of harmful agents, smells, and odor from the well water. Selecting the best whole house water filter cartridge is the most effective way of procuring safe and clean water all the time in your home as well as convert hard water into soft water.
Hard Water vs Soft water?
The presence of excess heavy metals and minerals can make well water hard. A whole house water filter is useful in filtering out these impurities and keeping the water supply to your home well cleaned. If you have never heard of the terms ‘hard’ and ‘soft’ water, here’s how they’re defined:
Hard water is known as containing an appreciable percentage of dissolved minerals, like chalk, limestone, magnesium, dolomite, iron, and calcium. Though these minerals are not considered to be hazardous for drinking and domestic use when consumed in small quantities, their high amount in water can have negative impacts. Besides ruining your water pipes, they can impair your health, hair, and skin. Due to the high concentration of minerals, hard water strips the skin and hair of their essential moisture and leaves them dull, dry, and lifeless.
After the removal of extra minerals that turn the water hard, the resulting water is called soft water. Soft water is considered better in terms of taste and uses for other purposes, such as laundry, washing dishes, and bathing, etc. It doesn’t have any adverse effects on you or your plumbing. The only ions left in soft water after filtration are sodium ions that naturally eliminate the hardness of well water. As hard water contains calcium and magnesium, it reacts with soap and reduces its effectiveness in cleaning properly. Soft water ends this problem produces bubbly and rich foam. The only thing to bear in mind is that sodium may be harmful to plants in your home, so avoid using this water for gardening.
The most expedient, cost-effective, and trouble-free way of treating hard water and getting food-grade water is to install a whole house water filter in the house. Whole house water filtration systems work the best to ensure safe water for the entire home when installed between the main water entrance and the faucet that opens the water supply to all the taps in your home.
Things to consider before buying a whole house water filter
It’s a no-brainer that clean and safe water is an essential part of our daily lives. However, various research studies have recently highlighted the issues related to the quality and safety of water used for drinking and home use. This is why now more than ever people are paying attention to ensuring that the well water delivered to their homes is free from all kinds of harmful elements. There is an unlimited range of whole house water filter cartridges available in the market. While it’s good to have multiple options to choose from, it also makes the task of finding the best whole house water filtration system harder. To help you with this problem, we have compiled a list of the most important features to take into consideration before making the choice and investing your money in the right one. The first thing you need to know is the quality of water provided to your home. This step will assist in recognizing the contaminants in the water and pave your way to the kind of filtration system you need to buy. The appropriate filtration system will be useful in purifying the water of these specific impurities more effectively. For those using well water, a whole house water filter would be more apt as compared to other filters in the market. If you have access to the internet, it will make the task of assessing the kind of contaminants found in the water a lot easier. You can use find water quality reports online and identify which toxic materials, minerals, and metals are present in the water supply of your home. Another thing to keep in mind is to know which type of filter a filtration cartridge comprises. Let’s make one thing clear that all the filters are designed to remove some basic impurities, nasty smells, and bad taste from the water. However, water filters aimed at processing well water are different in their functioning. These filters also have the ability to remove excess minerals, heavy metals, and other contaminants. Another important factor to think through is your requirement for water flow. It’s imperative that you install a filtration system that meets your daily need for water. A filter having the capacity of at least 10 to 15 gallons per second is sufficient to accommodate bigger houses. The relatively higher cost and difficult installation method are the only cons to keep in view while making a decision regarding whole house water filters. Cost is undoubtedly one of the most important points to think about when looking for the best whole house water filtration system. It might not be possible to get the best whole house water filter without having to spend a fortune. Furthermore, keep in mind that you’ll also have to bear the cost of capacity and replacing the filters to keep your filtration system giving the best output. Last but not the least, always look for a filtration unit that fits the available space and storage for the installation of the system at your home.
The Bottom Line
If you’re tired of the unpleasant taste and smell of water or it leaves your clothes, dishes, sink, and bathtub with unsightly spots, a water filter can make all your worries go away. It can help you protect your health, skin, hair, home, and appliances. Just remember that no filter is built to filter all types of impurities, so take your time and do some digging before making the final choice. The key is to pay attention to what you want out of your filtration system. Start by determining the quality of water at your home, search for the filters to treat the water, be sure to install a unit that meets your usage requirement, and keep your budget and cost of installing and maintaining the filtration system in view. We hope the information shared above will help to make the process of finding the best whole house water filter system easier for you. So, say goodbye to smelly, polluted, and bad-tasting water and get your unlimited supply of fresh, clean, and safe water with the product of your choice from above today.